Samsung
Samsung launches 3nm Exynos W1000 wearable processor
Samsung is set to revolutionize its wearable game with a 3nm Exynos W1000 processor. The company officially launched its first 3nm processor, not for mobile but wearable devices. The chipset is set to debut with Samsung’s upcoming smartwatch models.
The Exynos W1000 wearable processor is manufactured on an advanced 3nm process by Samsung. The Korean tech giant is said to have utilized Samsung Foundry’s second-generation 3nm node. The chip is equipped with a Cortex-A78 CPU core for enhanced performance.
Exynos W1000’s CPU is quite powerful, featuring 1x Cortex-A78 and 4x Cortex-A55. As for the graphics, the new Exynos packs Arm Mali-G68 MP2 GPU, supporting screens with resolutions up to 640 x 640 pixels.
It is expected to offer 2.7x faster app launch times compared to the Exynos W930. In addition, the performance in single-core benchmark is 3.4x faster, while 3.7x faster in multi-core.
The company’s new wearable processor also enables faster app switching. Apart from 32Gb integrated internal memory, it incorporates many new technologies for size reduction and performance/efficiency increment.
Exynos W1000 also packs a 2.5D always-on display (AOD) engine. It is slated to offer an enhanced display and watch faces with rich details. Each element of the AOD UI is ultra-clear and easy to check.
Samsung’s upcoming Galaxy Watch Ultra and Watch 7 series will pack this newly launched processor. Apple’s Watch Ultra 2 packs an S9 processor, which is manufactured on 4nm process technology.
As the popularity of wearables increases, upgraded chips may give an edge to Samsung. The first Watch Ultra by Samsung is unquestionably coming to compete with Apple’s Watch Ultra segment.
Last but not least, Samsung revealed Exynos W1000 has Bluetooth LE for audio and LPDDR5 RAM for enhanced power efficiency. The platform’s connectivity features include 4G LTE, Bluetooth, Wi-Fi b/g/n, GPS, and NFC.
We are in October 2024 and Samsung is rolling out a new update for the Galaxy A33 5G smartphone, which brings the September 2024 security patch to improve system security and stability. The update is available for users in Brazil and the company will soon expand it to more countries.
September 2024 security update fixes several Samsung and Google vulnerabilities to make the device’s performance smoother. It includes 1 critical issue and 43 high-level ones for Google. One of these issues was already fixed in earlier updates, and another one doesn’t impact Galaxy devices.
In addition, Samsung is adding 23 of its fixes to improve security. These vulnerabilities are mainly related to My Files, Theme Center, One UI Home, Knox, and Dex. This update makes the smartphone more reliable, secure, and stable.
Users of Samsung Galaxy A33 5G are getting a September 2024 security update with One UI build version A336MUBSAEXI8. They will have to download a 262MB package to install the update. It is an initial rollout so it may take some hours or days to reach all models.
If you have received the notification of the update then install it now to get a bug-free experience. You can also check the update by visiting the Settings app on your smartphone and opening the Software Update section.
Now, click on the Download and install option. If any update is available, you can follow the on-screen instructions to install the update on your Galaxy smartphone.
Notably, the update is based on Android 14-based One UI 6.1. This device is eligible for the next major One UI update, One UI 7, based on Android 15. Samsung is going to release a stable One UI 7 in January 2025 along with the Galaxy S25 series. After its debut, Samsung will make its wider rollout for all eligible devices.
Samsung One UI 7 design will be Simple, Impactful and Emotive
Samsung’s recent SmartThings update broke many Galaxy S10 and Note10 devices. Following the reports, the company pulled the update and apologized to consumers. A new release is also reportedly released through Galaxy Store.
Isn’t it too late?
The glitchy SmartThings update led many Galaxy users to lose their data for no reason. As soon as users installed the SmartThings update, their phone was stuck in the boot loop. There’s no solution but to factory reset the device through Recovery.
Samsung acknowledges the recent SmartThings update affected some Galaxy phones running Android 12. We have recently reported problems appearing on Galaxy phones such as the Galaxy S10 and Note 10 series.
Samsung revealed that it had stopped updating the SmartThings as soon as it became aware of the issue and working on a solution “as a matter of urgency.” If you have experienced any inconvenience, please contact your nearest service center.
Some Galaxy smartphones running Android 12-based One UI operating system, such as the Galaxy Note 10 and Galaxy S10 series, have experienced a repeated boot error when updating to the latest version of the SmartThings app.
If you have an idea of factory reset through Recovery, you don’t need to visit the service center. Be aware that you would need to log in with the same Google Account that you were using before factory resetting the device.
Manual data wipe puts Google’s FRP lock for security purposes. In case you don’t have access to credentials, a service center visit is necessary. Samsung may have notified their repair partners to assist you nicely with seamless repairs.
🚨 Heads up, Galaxy users!
Some Samsung devices on Android 12 (like Note 10, S10 series) are facing boot issues after SmartThings app update.
Samsung has paused updates and is working on a fix.
If you're affected, contact your nearest service center.#Samsung #SmartThings pic.twitter.com/1RFzWA5jiF
— Yash Rathore (@YashRathoreX) October 4, 2024
Following the SDC24, Samsung and Kohler announced a strategic partnership in the United States. The companies are joining forces to achieve a significant advancement in water management and sustainability.
Kohler’s Anthem smart showers can now be controlled through SmartThings. Users will be able to monitor the amount of shower water used directly through the brand-new water layer on SmartThings Map View, coming in early 2025.
The intelligent water management will be accessible through the SmartThings app on Samsung Smart TVs, Family Hub, and smartphones to provide a clear and convenient way to track shower water consumption in real-time.
Samsung Map View offers users direct access to their home’s shower water usage. Integrated within the SmartThings ecosystem, users can use Map View to monitor and manage water consumption with real-time tracking, and insights into usage patterns.
This integration with the SmartThings ecosystem highlights Samsung and Kohler’s dedication to enhancing home automation while promoting more efficient water use.